Bearing data

Dimension standards	Boundary dimensions: ISO 355 (single bearing)
Tolerances For additional information → Tolerances	Normal tighter geometrical tolerances for bearings with designation suffix CL7C check availability of P5 Values: ISO 492 (table 1, table 2) Total width tolerances: not standardized (table 3)
Internal clearance For additional information → Internal clearance	Standard (table 4) Other clearance values are identified by the designation suffix C followed by a three-digit number. For clearance values not listed in the product tables, contact SKF. Values are valid for unmounted bearing sets under measuring loads of: D ≤ 90 mm → 0,1 kN 90 < D ≤ 240 mm → 0,3 kN D > 240 mm → 0,5 kN
Misalignment	Where misalignment cannot be avoided, SKF recommends using a face-to-face arrangement. Any misalignment increases bearing noise and reduces bearing service life.

Find a distributor