Initial grease fill
Open angular contact thrust ball bearings for screw drives should be lubricated with a grease quantity that fills ~ 25 to 35% of the free space in the bearing.
Freshly greased bearings should be operated at low speeds during the running-in period (→ Running in of grease lubricated bearings.) This enables excess grease to be displaced and the remainder to be evenly distributed within the bearing. If this running-in phase is neglected, there is a risk that temperature peaks can lead to premature bearing failure.
The initial grease fill depends on the bearing type, series and size as well as the speed factor A.
A = n dm
||=||speed factor [mm/min]
|dm||=||bearing mean diameter [mm]
= 0,5 (d + D)
|n||=||rotational speed [r/min]|
The initial grease fill for open bearings can be estimated using
G = K Gref
||=||initial grease fill [cm3]
|Gref||=||reference grease quantity [cm3] (→ Product tables)|
|K||=||a calculation factor dependent on the bearing type and the speed factor A (diagram 1)
- high-speed capability
- excellent resistance to ageing
- very good rust inhibiting properties
The technical specifications of the grease are listed in table 1.