LCP profile data
 |
||
| Material
codes | Slide ring: 741
Energizer: A-8501 Anti-extrusion rings: P-2506 → Materials |
|
| Pressure | Up to 690 bar (10 000 psi) | |
| Speed | Up to 1,5 m/s (4.9 ft/s) | |
| Temperature
range |  For temperature limits depending on fluid compatibility → table 1 |
|
 | Extreme low temperature range: may be intermittently exposed (e.g. cold start-up) without seal damage, but seal performance may be compromised while in this range | |
 | Temperatures below the recommended operating range: seal performance depends on system design (precision guiding arrangement recommended) | |
 | Recommended operating temperature range for this profile and material | |
 | Temperatures above the recommended operating range: acceptable only with reduced pressure, speed, and/or e-gap | |
 | Extreme high temperature range: only occasional short-term exposure | |
| Dimension
standards | Some metric sizes fit seal housings in accordance with ISO 5597:2010. | |
| Counter-
surface | → Specifications for effective sealing systems | |
| Size list | → Metric [pdf]
→ Inch [pdf] |
|
| Additional
information | → Piston seals incorporating anti-extrusion rings | |
| Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously. | ||
