Cookies auf der SKF Webseite

Mithilfe von Cookies stellen wir sicher, dass Sie unsere Webseiten und -anwendungen optimal nutzen können. Wenn Sie ohne Änderung Ihrer Browser-Einstellungen fortfahren, gehen wir davon aus, dass Sie der Nutzung von Cookies zustimmen. Natürlich können Sie Ihre Browser-Einstellungen bezüglich Cookies jederzeit ändern.

Bearing data

  • metric bearings: not standardized 
  • inch bearings: cones and cups dimensions of many inch bearings → AFBMA Standard 19 (ANSI B3.19);
    ANSI/ABMA Standard 19.2 has replaced the above standard, but does not include dimensions.

For additional
  • dimensional tolerances (except for width T): Normal
  • geometrical tolerances: P5
  • values: ISO 492 (table 1, table 2, table 3)

For additional
Bearing internal clearance
  • bearings are ready-to-mount units with an axial internal clearance adapted for the actual application
  • bearing components should be arranged in the prescribed order and may not be interchanged with components of another bearing
  • designations with suffix C followed by a three- or four-digit number expresses mean value of the axial internal clearance in μm
    (for clearance values not listed in the product tables, contact SKF)

Misalignment increases bearing noise and reduces bearing service life.

If misalignment cannot be avoided, SKF recommends using TDI design bearings (face-to-face arrangement). For information, contact the SKF application engineering service.

SKF logo