SKF housings for paper machines must be mounted properly by experienced, knowledgeable people using the correct tools.
SBFN housings can be mounted at angles of 0°, 90°, 180° and 270°. To prevent oil leakage, the arrow on the cover should always point upward.
For SBFN and SBPN housings, the interface between the housing and covers should be coated with an oil-resistant sealant.
SBPN and SDM housings should be mounted so that the oil outlets with the plastic plugs are facing outward.
For additional information, contact the SKF application engineering service. SKF can also assist during mounting or provide a complete installation service.