Cookies no site da SKF

Nós utilizamos cookies para assegurar que você tenha a melhor experiência em nossos sites e em nossos aplicativos da Web. Caso você continue sem alterar as configurações de seu navegador, entenderemos que você deu seu consentimento para receber cookies. No entanto, você poderá alterar as configurações de cookies de seu navegador a qualquer momento.


S9B profile data

Material codes
O-ring energizer: N70/6052 or A-8501
Slide ring: X-ECOPUR or 741
PressureX-ECOPUR slide ring → up to 600 bar (8 700 psi)
PTFE 741 slide ring → up to 400 bar (5 800 psi)
SpeedUp to 2 m/s (6.5 ft/s)
With X-ECOPUR slide ring:

With 741 slide ring:

Extreme low temperature range: may be intermittently exposed (e.g. cold start-up) without seal damage, but seal performance may be compromised while in this range
Temperatures below the recommended operating range: seal performance depends on system design (precision guiding arrangement recommended)
Recommended operating temperature range for this profile and these materials
Temperatures above the recommended operating range: acceptable only with reduced pressure, speed, and/or e-gap
Extreme high temperature range: only occasional short-term exposure (e.g. cylinder in curing oven of a powder coating process)
Some metric sizes fit seal housings in accordance with ISO 7425-2:1989 or ISO 3320:2013.
Specifications for effective sealing systems
Size listMetric [pdf]
Inch [pdf]
Buffer seals incorporating slide rings
Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously.
SKF logo