Sealing solutions

Some self-aligning ball bearings in the 22 and 23 series are also available with seals (fig. 1).
Sealed bearings have a contact seal on both sides that is made of oil and wear-resistant NBR and reinforced with a sheet steel insert (designation suffix 2RS1).
Sealed bearings are lubricated for the life of the bearing and should not be washed or relubricated. The bearings are considered virtually maintenance-free. If they are to be hot mounted, SKF does not recommend heating the bearings above 80 °C (175 °F).

Greases for sealed bearings

Depending on their outside diameter, sealed bearings are filled with one of the two greases listed in table 1. Both have good corrosion inhibiting properties.
SKF logo