Multi-purpose kits for quick and easy mounting and dismounting
The SKF TMMK series is designed for the quick and precise mounting and dismounting of deep groove ball bearings from shafts, housings and blind housings.
The TMMK 10-35 suits bearings with bore diameters from 10 to 35 mm, whereas the TMMK 20-50 suits bearings with bore diameters from 20 to 50 mm.
For mounting, a multi-purpose fitting tool is included which is suitable for mounting bearings as well as bushings, seal rings, belt pulleys and other similar products.
For dismounting of deep groove ball bearings from blind housings and shafts, the SKF TMMK series contains a unique three-armed puller.
When dismounting deep groove ball bearings from housings, a combination of this puller, sliding hammer and support rings enables easy removal of the bearings.
- All parts are clearly arranged in the case for easy selection and identification
- The correct combination of impact ring and sleeve helps ensure that mounting forces are not transmitted via the rolling elements of the bearing, minimizing damage to bearing due to incorrect mounting
- The impact rings are made of high-impact modified polyamide. The impact sleeves are made of glass fibre-reinforced, high-impact modified polyamide, which is super-tough, strong and lightweight
- The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The handle, with comfortable rubber-grip for good handling, absorbs shock and vibration
- The claws are especially designed to facilitate a precise fit in the bearing’s raceways, providing good grip and allowing the application of higher dismounting forces
- The designation is laser-engraved on the arms allowing easy identification and selection
- The springs are colour-coded allowing easy selection and matching
- Elastic locking ring results in easy connection of puller arms to spindle
Heavy sliding weight of the sliding hammer generates a high dismounting force
TMMK 10-35 - Dismounting
TMMK 10–35 is suitable for dismounting the following SKF deep groove ball bearingss 60.. series 62.. series 63.. series 64.. series 16… series 6000–6017 6200–6211 6300–6307 6403 16002–16003 62/22 63/22 16011 62/28 63/28
TMMK 10-35 - Mounting
TMMK 20-50 - Dismounting
TMMK 20-50 - Mounting
Technical data TMMK 10-35
Technical data Designation TMMK 10–35 Number of impact rings 24 Number of sleeves 2 Impact rings bore diameter 10–35 mm (0.39–1.38 in.) Impact rings outer diameter 26–80 mm (1.02–3.15 in.) Dead-blow hammer TMFT 36-H Dimensions of case 530 × 110 × 360 mm (20.9 × 4.3 × 14.2 in.) Weight 7,6 kg (16.8 lb)
Technical data TMMK 20-50