Cookies on the SKF website

SKF uses cookies on our websites to align the information shown as closely as possible to our visitors’ preferences, such as country and language choices.

Will you accept SKF cookies?

Bearing data

Dimension standardsISO 7063 and ANSI/ABMA Standard 18.1 (where standardized)

Profile of the outer ring running surface

  • KR .. (B) designs
    Radius = 500 mm
  • Other designs
    Improved crowned profile for better load distribution, higher stiffness and reduced wear
Tolerances

For additional information → Tolerances

Normal, except:

  • KR, KRE, KRV designs: ISO 7063
  • diameter of the crowned running surface: 0/–0,05 mm
  • stud shank diameter: h7
  • eccentric collar diameter: h9

Values for Normal tolerance class: ISO 492 (table 1)

Values for ISO tolerance classes: h7 and h9 (table 2)

Internal clearance

For additional information → Internal clearance
Between C2 and Normal
Values: ISO 5753-1 (table 3)
Values are valid for unmounted bearings under zero measuring load.
Defect frequencies
Perform calculations
SKF logo