Small induction heater
High heating capacity of up to 40 kg bearing

The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The induction heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with a time mode for heating components other than bearings. The induction heating system is supplied standard with three yokes and is available in two executions: 230V/50-60Hz and 100-110V/50-60Hz.
Demonstration video SKF Induction heaters
Please note
This English spoken video has subtitles. Please choose your language as applicable.
Features and benefits

- Compact lightweight design; just 20,9 kg (46.0 lb) facilitating portability
- 2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
- Capable of heating a 28 kg (61.7 lb) bearing in just 20 minutes
- Temperature mode pre-set at 110 °C (230 °F) to help prevent bearing over-heating
- Automatic demagnetisation
-
Technical data
Technical data Designation TIH 030M/230V TIH 030M/110V Description Induction heater SKF m20 performance 28 kg (61.7 lb) Voltage, V/Hz 230V/50-60Hz or 100-110V/50-60Hz Bearing: - Maximum weight 40 kg (88 lb) - Maximum bore diameter 20 - 300 mm (0.8 - 11.8 in.) Temperature control: - Range 0 - 250 °C (32 - 482 °F) - Magnetic probe Yes, K-type - Accuracy (electronics) ± 2 °C (± 3.6 °F) Time control: - Range 0 - 60 minutes - Accuracy ± 0,01 sec. Maximum heating temperature* 250°C (482 °F) Thermometer mode Yes Bearing mode Yes Power setting 2-step; 50% or 100% Demagnetisation according to SKF norms (automatic) Yes (<2 A/cm) Can heat sealed bearings Yes Can heat pre-greased bearings Yes Error guiding codes Yes Thermal overload protection Yes Control panel Control panel and LED display integrated in remote control Operating area (w x h) 100 x 135 mm (3.9 x 5.3 in.) Coil diameter 95 mm (3.7 in.) Dimensions (w x d x h) 450 x 195 x 210 mm (17.7 x 7.6 x 8.2 in.) Total weight, including yokes 20,9 kg (46.0 lb) Maximum power consumption 2,0 kVA Standard yokes 45 x 45 x 215 mm (1.7 x 1.7 x 8.4 in.) for heating bearings with bore diameter of 65 mm (2.6 in.) and larger. 28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in.) for heating bearings with bore diameter of 40 mm (1.6 in.) and larger. 14 x 14 x 215 mm (0.5 x 0.5 x 8.4 in.) for heating bearings with bore diameter of 20 mm (0.8 in.) and larger Core cross section 45 x 45 mm (1.7 x 1.7 in.) Bearing support arms Yes, foldable Yoke storage Yes, internal integrated in foldable bearing support arms Cooling fan No Swivel arm No Housing material Steel and glass filled polyamide * Depending on bearing or work piece weight. For higher temperatures, please contact SKF. -
Accessories
-
Spare parts
Related documents
- Product data sheet TIH 030m (106 KB)
- Instructions for use TIH 030m (633 KB)