Hydraulic pump 150 MPa
150 MPa - (21 750 psi)
The 728619 E is a two-stage pump suitable for use with SKF Supergrip bolts and for the mounting and dismounting of bearings or components where a maximum pressure of 150 MPa (21 750 psi) is required. The pump is supplied with a 3 000 mm (118 in.) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with SKF mounting fluid LHMF 300, is supplied with an extra litre and is protected in a sturdy metal case.
- Oil container capacity 2 400 cm³ (146.5 in.³)
- Two stage pressure pumping
-
Fitted with a pressure gauge
- Packed in a sturdy protective case
- SKF Supergrip bolts
- Oil injection applications where the maximum pressure is 150 MPa (21 750 psi)
- All sizes SKF Hydraulic nuts
-
Technical data
Technical data Designation 728619 E Maximum pressure 150 MPa (21 750 psi) Volume/stroke 1st Stage 20 cm3 below 2,5 MPa (1.2 in.3 below 362 psi) Volume/stroke 2nd Stage 1,00 cm3 above 2,5 MPa (0.06 in.3 above 362 psi) Oil container capacity 2 400 cm3 (146.5 in.3) Length of pressure hose 3 000 mm (118 in.) Connection nipple G1/4 quick connection Weight 11,4 kg (25 lb) -
Spare parts
Related documents
- Instructions for use 728619 E (1.2 MB)