Change Location: Africa

Web Customer Link

Contact

Accessories

SKF supplies accessories to enable reliable lubrication and location of SKF cam followers (table 1). Accessories, other than grease fittings and hexagonal nuts, must be ordered separately.

Grease fittings

are supplied with each cam follower as standard (table 1) and are the only ones to be used
can be pressed into position
are listed in table 2 with their dimensions
have heads that protrude from the stud head end by 1,5 mm for KR design cam followers of sizes 16 and 19

are supplied with each cam follower as standard (table 1)
are in accordance with ISO 4032 or ISO 8673
are manufactured to strength class 8.8
are zinc galvanized in accordance with ISO 4042
are listed in table 3 with their dimensions and recommended tightening torques

VD1 plugs

are used to plug the relubrication hole end in the stud of KR design cam followers of sizes 16 and 19 without designation suffix PPSKA, where:
- relubrication is not required
- there is no space for the head of the grease fitting
must be ordered separately (table 1)

AP design adapters

enable cam followers to be relubricated via a centralized lubrication system
have a connection that accommodates, for example, 4 × 0,75 polyamide tubing in accordance with DIN 73378, as shown in fig. 1, in which:
1. 1 Connection
2. 2 O-ring
3. 3 Adapter connection
4. 4 Female thread M 10x1
5. 5 Polyamide tube
must be ordered separately (table 1)
are listed in table 4 with their dimensions