S9B profile data
 |
||
| Material codes
| O-ring energizer: N70/6052 or A-8501
Slide ring: X-ECOPUR or 741 → Materials |
|
| Pressure | X-ECOPUR slide ring → up to 600 bar (8 700 psi)
PTFE 741 slide ring → up to 400 bar (5 800 psi) |
|
| Speed | Up to 2 m/s (6.5 ft/s) | |
| Temperature
range | With X-ECOPUR slide ring:
 With 741 slide ring:  |
|
 | Extreme low temperature range: may be intermittently exposed (e.g. cold start-up) without seal damage, but seal performance may be compromised while in this range | |
 | Temperatures below the recommended operating range: seal performance depends on system design (precision guiding arrangement recommended) | |
 | Recommended operating temperature range for this profile and these materials | |
 | Temperatures above the recommended operating range: acceptable only with reduced pressure, speed, and/or e-gap | |
 | Extreme high temperature range: only occasional short-term exposure (e.g. cylinder in curing oven of a powder coating process) | |
| Dimension
standards | Some metric sizes fit seal housings in accordance with ISO 7425-2:1989 or ISO 3320:2013. | |
| Counter-
surface | → Specifications for effective sealing systems | |
| Size list | → Metric [pdf]
→ Inch [pdf] |
|
| Additional
information | → Buffer seals incorporating slide rings | |
| Maximum values of application parameters (e.g. pressure, speed, temperature, e-gap) should not be applied continuously nor simultaneously. | ||
