Cookies on the SKF website

SKF uses cookies on our websites to align the information shown as closely as possible to our visitors’ preferences, such as country and language choices.

Will you accept SKF cookies?

Bearing data

Deep groove ball bearingsCylindrical roller bearings
Dimension standardsBoundary dimensions: ISO 15


For additional information → Tolerances



P6 geometrical tolerance

Values: ISO 492 (table 1, table 2)

Internal clearance

For additional information → Internal clearance


Check availability of other clearance classes

Values: ISO 5753-1 (table 3)Values: ISO 5753-1 (table 4)
Values are valid for unmounted bearings under zero measuring load.
Calculation dataDynamic load ratings C and fatigue load limits Pu are in accordance with ISO 20056-1.
Static load ratings C0 are in accordance with ISO 20056-2.
Permissible misalignmentIdentical to standard bearings
→ Bearing data→ Bearing data

Permissible axial displacement

smax → product table

NU design hybrid bearings can accommodate axial displacement (fig. 1). Displacement of the shaft relative to the housing occurs within these bearings. As a result, there is virtually no increase in friction.

Electrical properties

  • Protection against AC and DC currents
  • High impedance, even for very high frequencies, providing good protection against high frequency current and voltage peaks
  • Voltage level before the first arcing occurs through the seal/bearing contact of small hybrid deep groove ball bearings (NBR contact seal): > 2,5 kV DC
SKF logo