SKF reveals: Load sensing bearings with fiber optic sensors designed to speed up product development
2019 October 24, 09:00 CEST
Designers can accelerate the design cycle by analysing bearing loads quickly and accurately thanks to the addition of fiber optic based SKF’s Load Sensing Bearings – for pumps and compressorsGothenburg, Sweden, 24 October 2019: SKF releases the world’s first commercial load sensing bearing based on its proprietary fiber optic sensing technology. A technology, as earlier announced, being part of a long term strategic technical product development.The first product streamlines the creation of rotating products such as pumps, using angular contact ball bearings. In it SKF enables real-time measurement of bearing loads using fiber optic sensing.SKF Load Sensing Bearing – for pumps and compressors takes the guesswork out of product development, helping to speed up the design and verification process, by giving instant access to a variety of bearing data. This includes for example axial vs. radial loads, polar lots of the bearing´s internal strain field, strain spectra, load directions, speed of rotations and temperature.The bearings, which are interchangeable with conventional bearings, offer several benefits to designers and test engineers, including, optimised design, lower development costs, shorter design cycle and the ability to digitalise the design and verification process. OEMs and end-users can use the tool when testing and installing new equipment, to check that the correct load and lubrication requirements have been defined and are not exceeded in the real installation.“Understanding bearing loads is essential in the design of rotating equipment such as pumps.” explains Lars Kahlman, senior applications expert at SKF’s Drives Competence Center in Gothenburg, Sweden. “During the last years SKF has through extensive testing campaigns and simulations developed algorithms that makes the technology really accurate and robust. Our Load Sensing Bearing gives access to data that has been very difficult to access so far because it takes accurate strain measurements directly within the bearing.”The new sensing bearings are safe to use in hazardous environments as signal data is transferred at high-speeds by low power in optical fibers rather than as electrical signals, making the system also immune to electromagnetic fields. It also enables robust remote monitoring where wireless technology cannot be used as the optical fibers can transmit signals over very long distances.Aktiebolaget SKF(publ)
For further information, please contact: Press Relations:
Nia Kihlström, +46 31-337 2897; +46 706 67 28 97; firstname.lastname@example.orgSKF’s mission is to be the undisputed leader in the bearing business. SKF offers solutions around the rotating shaft, including bearings, seals, lubrication, condition monitoring and maintenance services. SKF is represented in more than 130 countries and has around 17,000 distributor locations worldwide. Annual sales in 2018 were SEK 85 713 million and the number of employees was 44,428. www.skf.com® SKF is a registered trademark of the SKF Group.